The DMR Standards

DMR, Digital Mobile Radio, is a digital radio standard specified for business mobile radio users developed by ETSI, European Telecommunications Standards Institute, and first ratified in 2005.

ETSI DMR Standards update

Introducing the revised TS102 361-4
V1.11.1 - Part 4 trunking protocol

This update followed the ETSI agreed process of submission of proposals by TGDMR members and input of suggestions by DMR Association members through the DMR Technical Working Group. Version 1.11.1 has further enhancements as seen from item 18 onwards over what was previously published in 1.10.1 in 2019.

Click here to download a summary of the Part 4 updates >

The standard is designed to operate within the existing 12.5kHz channel spacing used in licenced land mobile frequency bands globally and to meet future regulatory requirements for 6.25kHz channel equivalence. The primary goal is to specify affordable digital systems with low complexity. DMR provides voice, data and other supplementary services. Today, products designed to its specifications are sold in all regions of the world. The standards that define DMR consist of four documents. These can be downloaded free of charge from the ETSI website. The DMR Association concentrates its resources on the commercial applications of DMR comprised in Tier II and Tier III.

DMR Tier I products are for license-free use in the 446MHz band. Tier I provides for consumer applications and low-power commercial applications, using a maximum of 0.5Watt RF power. With a limited number of channels and no use of repeaters, no use of telephone interconnects, and fixed/integrated antennas, Tier I DMR devices are best suited for personal use, recreation, small retail and other settings that do not require wide area coverage or advanced features.

The DMR Association concentrates its effort on the professional use of DMR thus Tier II and Tier III.

Tier II covers licensed conventional radio systems, mobiles and hand portables operating in PMR frequency bands from 66-960MHz. The ETSI DMR Tier II standard is targeted at users who need spectral efficiency, advanced voice features and integrated IP data services in licensed bands for high-power communications. ETSI DMR Tier II specifies two-slot TDMA in 12.5kHz channels.
DMR Tier II products are commercially available today. Visit our product showcase page

DMR Tier III covers trunking operation in frequency bands 66-960MHz. The Tier III standard specifies two-slot TDMA in 12.5kHz channels. Tier III supports voice and short messaging handling similar to MPT-1327 with built-in 128 character status messaging and short messaging with up to 288 bits of data in a variety of formats. It also supports packet data service in a variety of formats, including support for IPv4 and IPv6.
DMR Tier III products are commercially available today. Visit our product showcase page

With DMR digital technology audio stays clear throughout the coverage area.